Generated Narrative: StructureDefinition ach-daily-diagnosticreport-lab

NameFlagsCard.TypeDescription & Constraintsdoco
.. DiagnosticReport 0..*USCoreDiagnosticReportProfileLaboratoryReportingA Diagnostic report - a combination of request information, atomic results, images, interpretation, as well as formatted reports
... id 1..1idLogical id of this artifact
... meta
.... Slices for extension Content/Rules for all slices
..... extension:link-received-date-extension 0..1dateTimeReceived Date
URL: http://www.cy118119.com/nhsn/fhirportal/dqm/ig/StructureDefinition/link-received-date-extension
... status 1..1codefinal | registered | preliminary | partial
Binding: ACH Daily Diagnostic Report Status ValueSet (required)
... subject
.... reference S1..1stringLiteral reference, Relative, internal or absolute URL
... encounter S0..1Reference(Encounter)Health care event when test ordered
.... reference S1..1stringLiteral reference, Relative, internal or absolute URL
... specimen S0..*Reference(Specimen)Specimens this report is based on
.... reference S1..1stringLiteral reference, Relative, internal or absolute URL
... conclusion S0..1stringClinical conclusion (interpretation) of test results
... conclusionCode S0..*CodeableConceptCodes for the clinical conclusion of test results

doco Documentation for this format
 <status value="active"/> <date value="2025-09-15T12:53:39-04:00"/> <publisher value="CDC National Healthcare Safety Network (NHSN)"/> <contact> <name value="CDC National Healthcare Safety Network (NHSN)"/> <telecom> <system value="url"/> <value value="http://www.cy118119.com/nhsn"/> </telecom> <telecom> <system value="email"/> <value value="nhsn@cdc.gov"/> </telecom> </contact> <description value="This profile contains Required and Must Support data elements for reporting diagnostic report lab information for the NHSN Acute Care Hospital (ACH) Daily Digital Quality Measure. This profile is based on the [HL7 FHIR廬 US Core Diagnostic Report - Lab Profile v3.1.1](http://hl7.org/fhir/us/core/STU3.1.1/StructureDefinition-us-core-diagnosticreport-lab.html)."/> <jurisdiction> <coding> <system value="urn:iso:std:iso:3166"/> <code value="US"/> </coding> </jurisdiction> <fhirVersion value="4.0.1"/> <mapping> <identity value="workflow"/> <uri value="http://hl7.org/fhir/workflow"/> <name value="Workflow Pattern"/> </mapping> <mapping> <identity value="v2"/> <uri value="http://hl7.org/v2"/> <name value="HL7 v2 Mapping"/> </mapping> <mapping> <identity value="rim"/> <uri value="http://hl7.org/v3"/> <name value="RIM Mapping"/> </mapping> <mapping> <identity value="w5"/> <uri value="http://hl7.org/fhir/fivews"/> <name value="FiveWs Pattern Mapping"/> </mapping> <kind value="resource"/> <abstract value="false"/> <type value="DiagnosticReport"/> <base href="http://www.cy118119.com/"/> <derivation value="constraint"/> <snapshot> <extension url="http://hl7.org/fhir/tools/StructureDefinition/snapshot-base-version"> <valueString value="3.1.1"/> </extension> <element id="DiagnosticReport"> <path value="DiagnosticReport"/> <short value="A Diagnostic report - a combination of request information, atomic results, images, interpretation, as well as formatted reports"/> <definition value="The US Core Diagnostic Report Profile is based upon the core FHIR DiagnosticReport Resource and created to meet the 2015 Edition Common Clinical Data Set 'Laboratory test(s) and Laboratory value(s)/result(s)' requirements."/> <comment value="This is intended to capture a single report and is not suitable for use in displaying summary information that covers multiple reports. For example, this resource has not been designed for laboratory cumulative reporting formats nor detailed structured reports for sequencing."/> <alias value="Report"/> <alias value="Test"/> <alias value="Result"/> <alias value="Results"/> <alias value="Labs"/> <alias value="Laboratory"/> <alias value="Lab Result"/> <alias value="Lab Report"/> <min value="0"/> <max value="*"/> <base> <path value="DiagnosticReport"/> <min value="0"/> <max value="*"/> </base> <constraint> <key value="dom-2"/> <severity value="error"/> <human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources"/> <expression value="contained.contained.empty()"/> <xpath value="not(parent::f:contained and f:contained)"/> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource"/> </constraint> <constraint> <key value="dom-3"/> <severity value="error"/> <human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource"/> <expression value="contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()"/> <xpath value="not(exists(for $id in f:contained/*/f:id/@value return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))"/> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource"/> </constraint> <constraint> <key value="dom-4"/> <severity value="error"/> <human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated"/> <expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()"/> <xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))"/> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource"/> </constraint> <constraint> <key value="dom-5"/> <severity value="error"/> <human value="If a resource is contained in another resource, it SHALL NOT have a security label"/> <expression value="contained.meta.security.empty()"/> <xpath value="not(exists(f:contained/*/f:meta/f:security))"/> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource"/> </constraint> <constraint> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice"> <valueBoolean value="true"/> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation"> <valueMarkdown value="When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time."/> </extension> <key value="dom-6"/> <severity value="warning"/> <human value="A resource should have narrative for robust management"/> <expression value="text.`div`.exists()"/> <xpath value="exists(f:text/h:div)"/> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource"/> </constraint> <mustSupport value="false"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="Entity. Role, or Act"/> </mapping> <mapping> <identity value="workflow"/> <map value="Event"/> </mapping> <mapping> <identity value="v2"/> <map value="ORU -> OBR"/> </mapping> <mapping> <identity value="rim"/> <map value="Observation[classCode=OBS, moodCode=EVN]"/> </mapping> </element> <element id="DiagnosticReport.id"> <path value="DiagnosticReport.id"/> <short value="Logical id of this artifact"/> <definition value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes."/> <comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation."/> <min value="1"/> <max value="1"/> <base> <path value="Resource.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="id"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="true"/> </element> <element id="DiagnosticReport.meta"> <path value="DiagnosticReport.meta"/> <short value="Metadata about the resource"/> <definition value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource."/> <min value="0"/> <max value="1"/> <base> <path value="Resource.meta"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Meta"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> </element> <element id="DiagnosticReport.meta.id"> <path value="DiagnosticReport.meta.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="DiagnosticReport.meta.extension"> <path value="DiagnosticReport.meta.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="DiagnosticReport.meta.extension:link-received-date-extension"> <path value="DiagnosticReport.meta.extension"/> <sliceName value="link-received-date-extension"/> <short value="Received Date"/> <definition value="This extension stores the date and time a Resource was received by the processing system (e.g. NHSNLink)."/> <min value="0"/> <max value="1"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> <profile value="http://www.cy118119.com/nhsn/fhirportal/dqm/ig/StructureDefinition/link-received-date-extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> </element> <element id="DiagnosticReport.meta.versionId"> <path value="DiagnosticReport.meta.versionId"/> <short value="Version specific identifier"/> <definition value="The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted."/> <comment value="The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes."/> <min value="0"/> <max value="1"/> <base> <path value="Meta.versionId"/> <min value="0"/> <max value="1"/> </base> <type> <code value="id"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> </element> <element id="DiagnosticReport.meta.lastUpdated"> <path value="DiagnosticReport.meta.lastUpdated"/> <short value="When the resource version last changed"/> <definition value="When the resource last changed - e.g. when the version changed."/> <comment value="This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a [read](http://hl7.org/fhir/R4/http.html#read) interaction."/> <min value="0"/> <max value="1"/> <base> <path value="Meta.lastUpdated"/> <min value="0"/> <max value="1"/> </base> <type> <code value="instant"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> </element> <element id="DiagnosticReport.meta.source"> <path value="DiagnosticReport.meta.source"/> <short value="Identifies where the resource comes from"/> <definition value="A uri that identifies the source system of the resource. This provides a minimal amount of [Provenance](http://hl7.org/fhir/R4/provenance.html#) information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc."/> <comment value="In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL."/> <min value="0"/> <max value="1"/> <base> <path value="Meta.source"/> <min value="0"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> </element> <element id="DiagnosticReport.meta.profile"> <path value="DiagnosticReport.meta.profile"/> <short value="Profiles this resource claims to conform to"/> <definition value="A list of profiles (references to [StructureDefinition](http://hl7.org/fhir/R4/structuredefinition.html#) resources) that this resource claims to conform to. The URL is a reference to [StructureDefinition.url](http://hl7.org/fhir/R4/structuredefinition-definitions.html#StructureDefinition.url)."/> <comment value="It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set."/> <min value="0"/> <max value="*"/> <base> <path value="Meta.profile"/> <min value="0"/> <max value="*"/> </base> <type> <code value="canonical"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/StructureDefinition|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> </element> <element id="DiagnosticReport.meta.security"> <path value="DiagnosticReport.meta.security"/> <short value="Security Labels applied to this resource"/> <definition value="Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure."/> <comment value="The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored."/> <min value="0"/> <max value="*"/> <base> <path value="Meta.security"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Coding"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="SecurityLabels"/> </extension> <strength value="extensible"/> <description value="Security Labels from the Healthcare Privacy and Security Classification System."/> <valueSet value="http://hl7.org/fhir/ValueSet/security-labels|4.0.1"/> </binding> </element> <element id="DiagnosticReport.meta.tag"> <path value="DiagnosticReport.meta.tag"/> <short value="Tags applied to this resource"/> <definition value="Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource."/> <comment value="The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored."/> <min value="0"/> <max value="*"/> <base> <path value="Meta.tag"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Coding"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Tags"/> </extension> <strength value="example"/> <description value="Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones"."/> <valueSet value="http://hl7.org/fhir/ValueSet/common-tags|4.0.1"/> </binding> </element> <element id="DiagnosticReport.implicitRules"> <path value="DiagnosticReport.implicitRules"/> <short value="A set of rules under which this content was created"/> <definition value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc."/> <comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc."/> <min value="0"/> <max value="1"/> <base> <path value="Resource.implicitRules"/> <min value="0"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="true"/> <isModifierReason value="This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation"/> <isSummary value="true"/> </element> <element id="DiagnosticReport.language"> <path value="DiagnosticReport.language"/> <short value="Language of the resource content"/> <definition value="The base language in which the resource is written."/> <comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)."/> <min value="0"/> <max value="1"/> <base> <path value="Resource.language"/> <min value="0"/> <max value="1"/> </base> <type> <code value="code"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet"> <valueCanonical value="http://hl7.org/fhir/ValueSet/all-languages"/> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Language"/> </extension> <strength value="preferred"/> <description value="A human language."/> <valueSet value="http://hl7.org/fhir/ValueSet/languages"/> </binding> </element> <element id="DiagnosticReport.text"> <path value="DiagnosticReport.text"/> <short value="Text summary of the resource, for human interpretation"/> <definition value="A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety."/> <comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later."/> <alias value="narrative"/> <alias value="html"/> <alias value="xhtml"/> <alias value="display"/> <min value="0"/> <max value="1"/> <base> <path value="DomainResource.text"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Narrative"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="Act.text?"/> </mapping> </element> <element id="DiagnosticReport.contained"> <path value="DiagnosticReport.contained"/> <short value="Contained, inline Resources"/> <definition value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope."/> <comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels."/> <alias value="inline resources"/> <alias value="anonymous resources"/> <alias value="contained resources"/> <min value="0"/> <max value="*"/> <base> <path value="DomainResource.contained"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Resource"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.extension"> <path value="DiagnosticReport.extension"/> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="DomainResource.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.modifierExtension"> <path value="DiagnosticReport.modifierExtension"/> <short value="Extensions that cannot be ignored"/> <definition value="May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](http://hl7.org/fhir/R4/extensibility.html#modifierExtension)."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="DomainResource.modifierExtension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="true"/> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.identifier"> <path value="DiagnosticReport.identifier"/> <short value="Business identifier for report"/> <definition value="Identifiers assigned to this report by the performer or other systems."/> <comment value="Usually assigned by the Information System of the diagnostic service provider (filler id)."/> <requirements value="Need to know what identifier to use when making queries about this report from the source laboratory, and for linking to the report outside FHIR context."/> <alias value="ReportID"/> <alias value="Filler ID"/> <alias value="Placer ID"/> <min value="0"/> <max value="*"/> <base> <path value="DiagnosticReport.identifier"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Identifier"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Event.identifier"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.identifier"/> </mapping> <mapping> <identity value="v2"/> <map value="OBR-51/ for globally unique filler ID - OBR-3 , For non-globally unique filler-id the flller/placer number must be combined with the universal service Id - OBR-2(if present)+OBR-3+OBR-4"/> </mapping> <mapping> <identity value="rim"/> <map value="id"/> </mapping> </element> <element id="DiagnosticReport.basedOn"> <path value="DiagnosticReport.basedOn"/> <short value="What was requested"/> <definition value="Details concerning a service requested."/> <comment value="Note: Usually there is one test request for each result, however in some circumstances multiple test requests may be represented using a single test result resource. Note that there are also cases where one request leads to multiple reports."/> <requirements value="This allows tracing of authorization for the report and tracking whether proposals/recommendations were acted upon."/> <alias value="Request"/> <min value="0"/> <max value="*"/> <base> <path value="DiagnosticReport.basedOn"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/CarePlan"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ImmunizationRecommendation"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/MedicationRequest"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/NutritionOrder"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ServiceRequest"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="workflow"/> <map value="Event.basedOn"/> </mapping> <mapping> <identity value="v2"/> <map value="ORC? OBR-2/3?"/> </mapping> <mapping> <identity value="rim"/> <map value="outboundRelationship[typeCode=FLFS].target"/> </mapping> </element> <element id="DiagnosticReport.status"> <path value="DiagnosticReport.status"/> <short value="final | registered | preliminary | partial"/> <definition value="final | registered | preliminary | partial"/> <requirements value="Diagnostic services routinely issue provisional/incomplete reports, and sometimes withdraw previously released reports."/> <min value="1"/> <max value="1"/> <base> <path value="DiagnosticReport.status"/> <min value="1"/> <max value="1"/> </base> <type> <code value="code"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="true"/> <isModifierReason value="This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid"/> <isSummary value="true"/> <binding> <strength value="required"/> <valueSet value="http://www.cy118119.com/nhsn/fhirportal/dqm/ig/ValueSet/ach-daily-diagnostic-report-status"/> </binding> <mapping> <identity value="workflow"/> <map value="Event.status"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.status"/> </mapping> <mapping> <identity value="v2"/> <map value="OBR-25 (not 1:1 mapping)"/> </mapping> <mapping> <identity value="rim"/> <map value="statusCode Note: final and amended are distinguished by whether observation is the subject of a ControlAct event of type "revise""/> </mapping> </element> <element id="DiagnosticReport.category"> <path value="DiagnosticReport.category"/> <slicing> <discriminator> <type value="pattern"/> <path value="$this"/> </discriminator> <rules value="open"/> </slicing> <short value="Service category"/> <definition value="A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes."/> <comment value="Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code."/> <alias value="Department"/> <alias value="Sub-department"/> <alias value="Service"/> <alias value="Discipline"/> <min value="1"/> <max value="*"/> <base> <path value="DiagnosticReport.category"/> <min value="0"/> <max value="*"/> </base> <type> <code value="CodeableConcept"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="DiagnosticServiceSection"/> </extension> <strength value="example"/> <description value="Codes for diagnostic service sections."/> <valueSet value="http://hl7.org/fhir/ValueSet/diagnostic-service-sections"/> </binding> <mapping> <identity value="w5"/> <map value="FiveWs.class"/> </mapping> <mapping> <identity value="v2"/> <map value="OBR-24"/> </mapping> <mapping> <identity value="rim"/> <map value="inboundRelationship[typeCode=COMP].source[classCode=LIST, moodCode=EVN, code < LabService].code"/> </mapping> </element> <element id="DiagnosticReport.category:LaboratorySlice"> <path value="DiagnosticReport.category"/> <sliceName value="LaboratorySlice"/> <short value="Service category"/> <definition value="A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes."/> <comment value="Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code."/> <alias value="Department"/> <alias value="Sub-department"/> <alias value="Service"/> <alias value="Discipline"/> <min value="1"/> <max value="1"/> <base> <path value="DiagnosticReport.category"/> <min value="0"/> <max value="*"/> </base> <type> <code value="CodeableConcept"/> </type> <patternCodeableConcept> <coding> <system value="http://terminology.hl7.org/CodeSystem/v2-0074"/> <code value="LAB"/> </coding> </patternCodeableConcept> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="DiagnosticServiceSection"/> </extension> <strength value="example"/> <description value="Codes for diagnostic service sections."/> <valueSet value="http://hl7.org/fhir/ValueSet/diagnostic-service-sections"/> </binding> <mapping> <identity value="w5"/> <map value="FiveWs.class"/> </mapping> <mapping> <identity value="v2"/> <map value="OBR-24"/> </mapping> <mapping> <identity value="rim"/> <map value="inboundRelationship[typeCode=COMP].source[classCode=LIST, moodCode=EVN, code < LabService].code"/> </mapping> </element> <element id="DiagnosticReport.code"> <path value="DiagnosticReport.code"/> <short value="US Core Laboratory Report Order Code"/> <definition value="The test, panel or battery that was ordered."/> <comment value="UsageNote= The typical patterns for codes are: 1) a LOINC code either as a translation from a "local" code or as a primary code, or 2) a local code only if no suitable LOINC exists, or 3) both the local and the LOINC translation. Systems SHALL be capable of sending the local code if one exists."/> <alias value="Type"/> <min value="1"/> <max value="1"/> <base> <path value="DiagnosticReport.code"/> <min value="1"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <binding> <strength value="extensible"/> <description value="LOINC codes"/> <valueSet value="http://hl7.org/fhir/us/core/ValueSet/us-core-diagnosticreport-lab-codes"/> </binding> <mapping> <identity value="workflow"/> <map value="Event.code"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.what[x]"/> </mapping> <mapping> <identity value="v2"/> <map value="OBR-4 (HL7 v2 doesn't provide an easy way to indicate both the ordered test and the performed panel)"/> </mapping> <mapping> <identity value="rim"/> <map value="code"/> </mapping> </element> <element id="DiagnosticReport.subject"> <path value="DiagnosticReport.subject"/> <short value="The subject of the report - usually, but not always, the patient"/> <definition value="The subject of the report. Usually, but not always, this is a patient. However, diagnostic services also perform analyses on specimens collected from a variety of other sources."/> <requirements value="SHALL know the subject context."/> <alias value="Patient"/> <min value="1"/> <max value="1"/> <base> <path value="DiagnosticReport.subject"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/us/core/StructureDefinition/us-core-patient"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Event.subject"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.subject[x]"/> </mapping> <mapping> <identity value="v2"/> <map value="PID-3 (no HL7 v2 mapping for Group or Device)"/> </mapping> <mapping> <identity value="rim"/> <map value="participation[typeCode=SBJ]"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.subject"/> </mapping> </element> <element id="DiagnosticReport.subject.id"> <path value="DiagnosticReport.subject.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="DiagnosticReport.subject.extension"> <path value="DiagnosticReport.subject.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="DiagnosticReport.subject.reference"> <path value="DiagnosticReport.subject.reference"/> <short value="Literal reference, Relative, internal or absolute URL"/> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources."/> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server."/> <min value="1"/> <max value="1"/> <base> <path value="Reference.reference"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <condition value="ref-1"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.subject.type"> <path value="DiagnosticReport.subject.type"/> <short value="Type the reference refers to (e.g. "Patient")"/> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)."/> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified."/> <min value="0"/> <max value="1"/> <base> <path value="Reference.type"/> <min value="0"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt"/> </extension> <strength value="extensible"/> <description value="Aa resource (or, for logical models, the URI of the logical model)."/> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types|4.0.1"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.subject.identifier"> <path value="DiagnosticReport.subject.identifier"/> <short value="Logical reference, when literal reference is not known"/> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference."/> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)."/> <min value="0"/> <max value="1"/> <base> <path value="Reference.identifier"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Identifier"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value=".identifier"/> </mapping> </element> <element id="DiagnosticReport.subject.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true"/> </extension> <path value="DiagnosticReport.subject.display"/> <short value="Text alternative for the resource"/> <definition value="Plain text narrative that identifies the resource in addition to the resource reference."/> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it."/> <min value="0"/> <max value="1"/> <base> <path value="Reference.display"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.encounter"> <path value="DiagnosticReport.encounter"/> <short value="Health care event when test ordered"/> <definition value="The healthcare event (e.g. a patient and healthcare provider interaction) which this DiagnosticReport is about."/> <comment value="This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests)."/> <requirements value="Links the request to the Encounter context."/> <alias value="Context"/> <min value="0"/> <max value="1"/> <base> <path value="DiagnosticReport.encounter"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Encounter"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Event.encounter"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.context"/> </mapping> <mapping> <identity value="v2"/> <map value="PV1-19"/> </mapping> <mapping> <identity value="rim"/> <map value="inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN]"/> </mapping> </element> <element id="DiagnosticReport.encounter.id"> <path value="DiagnosticReport.encounter.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="DiagnosticReport.encounter.extension"> <path value="DiagnosticReport.encounter.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="DiagnosticReport.encounter.reference"> <path value="DiagnosticReport.encounter.reference"/> <short value="Literal reference, Relative, internal or absolute URL"/> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources."/> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server."/> <min value="1"/> <max value="1"/> <base> <path value="Reference.reference"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <condition value="ref-1"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.encounter.type"> <path value="DiagnosticReport.encounter.type"/> <short value="Type the reference refers to (e.g. "Patient")"/> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)."/> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified."/> <min value="0"/> <max value="1"/> <base> <path value="Reference.type"/> <min value="0"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt"/> </extension> <strength value="extensible"/> <description value="Aa resource (or, for logical models, the URI of the logical model)."/> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types|4.0.1"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.encounter.identifier"> <path value="DiagnosticReport.encounter.identifier"/> <short value="Logical reference, when literal reference is not known"/> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference."/> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)."/> <min value="0"/> <max value="1"/> <base> <path value="Reference.identifier"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Identifier"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value=".identifier"/> </mapping> </element> <element id="DiagnosticReport.encounter.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true"/> </extension> <path value="DiagnosticReport.encounter.display"/> <short value="Text alternative for the resource"/> <definition value="Plain text narrative that identifies the resource in addition to the resource reference."/> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it."/> <min value="0"/> <max value="1"/> <base> <path value="Reference.display"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.effective[x]"> <path value="DiagnosticReport.effective[x]"/> <short value="Specimen Collection Datetime or Period"/> <definition value="This is the Specimen Collection Datetime or Period which is the physically relevent dateTime for laboratory tests."/> <comment value="If the diagnostic procedure was performed on the patient, this is the time it was performed. If there are specimens, the diagnostically relevant time can be derived from the specimen collection times, but the specimen information is not always available, and the exact relationship between the specimens and the diagnostically relevant time is not always automatic."/> <requirements value="Need to know where in the patient history to file/present this report."/> <alias value="Observation time"/> <alias value="Effective Time"/> <alias value="Occurrence"/> <min value="1"/> <max value="1"/> <base> <path value="DiagnosticReport.effective[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="dateTime"/> </type> <type> <code value="Period"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Event.occurrence[x]"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.done[x]"/> </mapping> <mapping> <identity value="v2"/> <map value="OBR-7"/> </mapping> <mapping> <identity value="rim"/> <map value="effectiveTime"/> </mapping> </element> <element id="DiagnosticReport.issued"> <path value="DiagnosticReport.issued"/> <short value="DateTime this version was made"/> <definition value="The date and time that this version of the report was made available to providers, typically after the report was reviewed and verified."/> <comment value="May be different from the update time of the resource itself, because that is the status of the record (potentially a secondary copy), not the actual release time of the report."/> <requirements value="Clinicians need to be able to check the date that the report was released."/> <alias value="Date published"/> <alias value="Date Issued"/> <alias value="Date Verified"/> <min value="1"/> <max value="1"/> <base> <path value="DiagnosticReport.issued"/> <min value="0"/> <max value="1"/> </base> <type> <code value="instant"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="w5"/> <map value="FiveWs.recorded"/> </mapping> <mapping> <identity value="v2"/> <map value="OBR-22"/> </mapping> <mapping> <identity value="rim"/> <map value="participation[typeCode=VRF or AUT].time"/> </mapping> </element> <element id="DiagnosticReport.performer"> <path value="DiagnosticReport.performer"/> <short value="Responsible Diagnostic Service"/> <definition value="The diagnostic service that is responsible for issuing the report."/> <comment value="This is not necessarily the source of the atomic data items or the entity that interpreted the results. It is the entity that takes responsibility for the clinical report."/> <requirements value="Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis."/> <alias value="Laboratory"/> <alias value="Service"/> <alias value="Practitioner"/> <alias value="Department"/> <alias value="Company"/> <alias value="Authorized by"/> <alias value="Director"/> <min value="0"/> <max value="*"/> <base> <path value="DiagnosticReport.performer"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/us/core/StructureDefinition/us-core-practitioner"/> <targetProfile value="http://hl7.org/fhir/us/core/StructureDefinition/us-core-organization"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Event.performer.actor"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.actor"/> </mapping> <mapping> <identity value="v2"/> <map value="PRT-8 (where this PRT-4-Participation = "PO")"/> </mapping> <mapping> <identity value="rim"/> <map value=".participation[typeCode=PRF]"/> </mapping> </element> <element id="DiagnosticReport.resultsInterpreter"> <path value="DiagnosticReport.resultsInterpreter"/> <short value="Primary result interpreter"/> <definition value="The practitioner or organization that is responsible for the report's conclusions and interpretations."/> <comment value="Might not be the same entity that takes responsibility for the clinical report."/> <requirements value="Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis."/> <alias value="Analyzed by"/> <alias value="Reported by"/> <min value="0"/> <max value="*"/> <base> <path value="DiagnosticReport.resultsInterpreter"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/CareTeam"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Event.performer.actor"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.actor"/> </mapping> <mapping> <identity value="v2"/> <map value="OBR-32, PRT-8 (where this PRT-4-Participation = "PI")"/> </mapping> <mapping> <identity value="rim"/> <map value=".participation[typeCode=PRF]"/> </mapping> </element> <element id="DiagnosticReport.specimen"> <path value="DiagnosticReport.specimen"/> <short value="Specimens this report is based on"/> <definition value="Details about the specimens on which this diagnostic report is based."/> <comment value="If the specimen is sufficiently specified with a code in the test result name, then this additional data may be redundant. If there are multiple specimens, these may be represented per observation or group."/> <requirements value="Need to be able to report information about the collected specimens on which the report is based."/> <min value="0"/> <max value="*"/> <base> <path value="DiagnosticReport.specimen"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Specimen"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="v2"/> <map value="SPM"/> </mapping> <mapping> <identity value="rim"/> <map value="participation[typeCode=SBJ]"/> </mapping> </element> <element id="DiagnosticReport.specimen.id"> <path value="DiagnosticReport.specimen.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="DiagnosticReport.specimen.extension"> <path value="DiagnosticReport.specimen.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="DiagnosticReport.specimen.reference"> <path value="DiagnosticReport.specimen.reference"/> <short value="Literal reference, Relative, internal or absolute URL"/> <definition value="A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources."/> <comment value="Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server."/> <min value="1"/> <max value="1"/> <base> <path value="Reference.reference"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <condition value="ref-1"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.specimen.type"> <path value="DiagnosticReport.specimen.type"/> <short value="Type the reference refers to (e.g. "Patient")"/> <definition value="The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources)."/> <comment value="This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified."/> <min value="0"/> <max value="1"/> <base> <path value="Reference.type"/> <min value="0"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="FHIRResourceTypeExt"/> </extension> <strength value="extensible"/> <description value="Aa resource (or, for logical models, the URI of the logical model)."/> <valueSet value="http://hl7.org/fhir/ValueSet/resource-types|4.0.1"/> </binding> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.specimen.identifier"> <path value="DiagnosticReport.specimen.identifier"/> <short value="Logical reference, when literal reference is not known"/> <definition value="An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference."/> <comment value="When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any)."/> <min value="0"/> <max value="1"/> <base> <path value="Reference.identifier"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Identifier"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value=".identifier"/> </mapping> </element> <element id="DiagnosticReport.specimen.display"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true"/> </extension> <path value="DiagnosticReport.specimen.display"/> <short value="Text alternative for the resource"/> <definition value="Plain text narrative that identifies the resource in addition to the resource reference."/> <comment value="This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it."/> <min value="0"/> <max value="1"/> <base> <path value="Reference.display"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.result"> <path value="DiagnosticReport.result"/> <short value="Observations"/> <definition value="[Observations](http://hl7.org/fhir/R4/observation.html) that are part of this diagnostic report."/> <comment value="Observations can contain observations."/> <requirements value="Need to support individual results, or groups of results, where the result grouping is arbitrary, but meaningful."/> <alias value="Data"/> <alias value="Atomic Value"/> <alias value="Result"/> <alias value="Atomic result"/> <alias value="Data"/> <alias value="Test"/> <alias value="Analyte"/> <alias value="Battery"/> <alias value="Organizer"/> <min value="0"/> <max value="*"/> <base> <path value="DiagnosticReport.result"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/us/core/StructureDefinition/us-core-observation-lab"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="v2"/> <map value="OBXs"/> </mapping> <mapping> <identity value="rim"/> <map value="outboundRelationship[typeCode=COMP].target"/> </mapping> </element> <element id="DiagnosticReport.imagingStudy"> <path value="DiagnosticReport.imagingStudy"/> <short value="Reference to full details of imaging associated with the diagnostic report"/> <definition value="One or more links to full details of any imaging performed during the diagnostic investigation. Typically, this is imaging performed by DICOM enabled modalities, but this is not required. A fully enabled PACS viewer can use this information to provide views of the source images."/> <comment value="ImagingStudy and the image element are somewhat overlapping - typically, the list of image references in the image element will also be found in one of the imaging study resources. However, each caters to different types of displays for different types of purposes. Neither, either, or both may be provided."/> <min value="0"/> <max value="*"/> <base> <path value="DiagnosticReport.imagingStudy"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ImagingStudy"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="outboundRelationship[typeCode=COMP].target[classsCode=DGIMG, moodCode=EVN]"/> </mapping> </element> <element id="DiagnosticReport.media"> <path value="DiagnosticReport.media"/> <short value="Key images associated with this report"/> <definition value="A list of key images associated with this report. The images are generally created during the diagnostic process, and may be directly of the patient, or of treated specimens (i.e. slides of interest)."/> <requirements value="Many diagnostic services include images in the report as part of their service."/> <alias value="DICOM"/> <alias value="Slides"/> <alias value="Scans"/> <min value="0"/> <max value="*"/> <base> <path value="DiagnosticReport.media"/> <min value="0"/> <max value="*"/> </base> <type> <code value="BackboneElement"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="v2"/> <map value="OBX?"/> </mapping> <mapping> <identity value="rim"/> <map value="outboundRelationship[typeCode=COMP].target"/> </mapping> </element> <element id="DiagnosticReport.media.id"> <path value="DiagnosticReport.media.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="DiagnosticReport.media.extension"> <path value="DiagnosticReport.media.extension"/> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="DiagnosticReport.media.modifierExtension"> <path value="DiagnosticReport.media.modifierExtension"/> <short value="Extensions that cannot be ignored even if unrecognized"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](http://hl7.org/fhir/R4/extensibility.html#modifierExtension)."/> <alias value="extensions"/> <alias value="user content"/> <alias value="modifiers"/> <min value="0"/> <max value="*"/> <base> <path value="BackboneElement.modifierExtension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="true"/> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="DiagnosticReport.media.comment"> <path value="DiagnosticReport.media.comment"/> <short value="Comment about the image (e.g. explanation)"/> <definition value="A comment about the image. Typically, this is used to provide an explanation for why the image is included, or to draw the viewer's attention to important features."/> <comment value="The comment should be displayed with the image. It would be common for the report to include additional discussion of the image contents in other sections such as the conclusion."/> <requirements value="The provider of the report should make a comment about each image included in the report."/> <min value="0"/> <max value="1"/> <base> <path value="DiagnosticReport.media.comment"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value=".inboundRelationship[typeCode=COMP].source[classCode=OBS, moodCode=EVN, code="annotation"].value"/> </mapping> </element> <element id="DiagnosticReport.media.link"> <path value="DiagnosticReport.media.link"/> <short value="Reference to the image source"/> <definition value="Reference to the image source."/> <min value="1"/> <max value="1"/> <base> <path value="DiagnosticReport.media.link"/> <min value="1"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Media"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value=".value.reference"/> </mapping> </element> <element id="DiagnosticReport.conclusion"> <path value="DiagnosticReport.conclusion"/> <short value="Clinical conclusion (interpretation) of test results"/> <definition value="Concise and clinically contextualized summary conclusion (interpretation/impression) of the diagnostic report."/> <requirements value="Need to be able to provide a conclusion that is not lost among the basic result data."/> <alias value="Report"/> <min value="0"/> <max value="1"/> <base> <path value="DiagnosticReport.conclusion"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="v2"/> <map value="OBX"/> </mapping> <mapping> <identity value="rim"/> <map value="inboundRelationship[typeCode="SPRT"].source[classCode=OBS, moodCode=EVN, code=LOINC:48767-8].value (type=ST)"/> </mapping> </element> <element id="DiagnosticReport.conclusionCode"> <path value="DiagnosticReport.conclusionCode"/> <short value="Codes for the clinical conclusion of test results"/> <definition value="One or more codes that represent the summary conclusion (interpretation/impression) of the diagnostic report."/> <min value="0"/> <max value="*"/> <base> <path value="DiagnosticReport.conclusionCode"/> <min value="0"/> <max value="*"/> </base> <type> <code value="CodeableConcept"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="AdjunctDiagnosis"/> </extension> <strength value="example"/> <description value="Diagnosis codes provided as adjuncts to the report."/> <valueSet value="http://hl7.org/fhir/ValueSet/clinical-findings"/> </binding> <mapping> <identity value="v2"/> <map value="OBX"/> </mapping> <mapping> <identity value="rim"/> <map value="inboundRelationship[typeCode=SPRT].source[classCode=OBS, moodCode=EVN, code=LOINC:54531-9].value (type=CD)"/> </mapping> </element> <element id="DiagnosticReport.presentedForm"> <path value="DiagnosticReport.presentedForm"/> <short value="Entire report as issued"/> <definition value="Rich text representation of the entire result as issued by the diagnostic service. Multiple formats are allowed but they SHALL be semantically equivalent."/> <comment value=""application/pdf" is recommended as the most reliable and interoperable in this context."/> <requirements value="Gives laboratory the ability to provide its own fully formatted report for clinical fidelity."/> <min value="0"/> <max value="*"/> <base> <path value="DiagnosticReport.presentedForm"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Attachment"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="v2"/> <map value="OBX"/> </mapping> <mapping> <identity value="rim"/> <map value="text (type=ED)"/> </mapping> </element> </snapshot> <differential> <element id="DiagnosticReport"> <path value="DiagnosticReport"/> </element> <element id="DiagnosticReport.id"> <path value="DiagnosticReport.id"/> <min value="1"/> </element> <element id="DiagnosticReport.meta.extension:link-received-date-extension"> <path value="DiagnosticReport.meta.extension"/> <sliceName value="link-received-date-extension"/> <min value="0"/> <max value="1"/> <type> <code value="Extension"/> <profile value="http://www.cy118119.com/nhsn/fhirportal/dqm/ig/StructureDefinition/link-received-date-extension"/> </type> </element> <element id="DiagnosticReport.status"> <path value="DiagnosticReport.status"/> <short value="final | registered | preliminary | partial"/> <definition value="final | registered | preliminary | partial"/> <binding> <strength value="required"/> <valueSet value="http://www.cy118119.com/nhsn/fhirportal/dqm/ig/ValueSet/ach-daily-diagnostic-report-status"/> </binding> </element> <element id="DiagnosticReport.subject.reference"> <path value="DiagnosticReport.subject.reference"/> <min value="1"/> <mustSupport value="true"/> </element> <element id="DiagnosticReport.encounter"> <path value="DiagnosticReport.encounter"/> <mustSupport value="true"/> </element> <element id="DiagnosticReport.encounter.reference"> <path value="DiagnosticReport.encounter.reference"/> <min value="1"/> <mustSupport value="true"/> </element> <element id="DiagnosticReport.specimen"> <path value="DiagnosticReport.specimen"/> <mustSupport value="true"/> </element> <element id="DiagnosticReport.specimen.reference"> <path value="DiagnosticReport.specimen.reference"/> <min value="1"/> <mustSupport value="true"/> </element> <element id="DiagnosticReport.conclusion"> <path value="DiagnosticReport.conclusion"/> <mustSupport value="true"/> </element> <element id="DiagnosticReport.conclusionCode"> <path value="DiagnosticReport.conclusionCode"/> <mustSupport value="true"/> </element> </differential> </StructureDefinition><a href="http://www.cy118119.com/">国产精品久久久久久一级毛片</a> <script> (function(){ var bp = document.createElement('script'); var curProtocol = window.location.protocol.split(':')[0]; if (curProtocol === 'https') { bp.src = 'https://zz.bdstatic.com/linksubmit/push.js'; } else { bp.src = 'http://push.zhanzhang.baidu.com/push.js'; } var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(bp, s); })(); </script> </body>